If you have opted to send in your harness please zip tie all accessories along the stock harness a few inches to the front and back of the upper subframe bolts as to assure that we splice all wires according to where they lie on your specific harness. There are 3 cavities available for 18 to 22 gauge wires for GPS, fuse blocks, and any other accessories you may be using. There are also 2 cavities available for 16 gauge wires for heavy duty lighting. 1 red and 1 yellow. CPR FAB only uses aircraft grade materials unless supplied by customer. Harnesses sent in will be turned around as quickly as possible. Please call for a turn around quote.
Ship to: CPR FAB - 1021 W 18th St Costa Mesa - CA - 92627
949-412-1971
Through countless hours of reliability testing and fine tuning with Team CPR FAB and Penhall Racing,  CPR FAB has made the arduous task of removing your subframe a thing of the past! NO MORE cutting zip ties or unwinding the wiring harness through the subframe and airbox! (Nevermind putting it all back together!) Simply remove 8 bolts and quickly disconnect the Aircraft Spec cannon plug and your entire subframe is removed in less than 3 minutes. Intact and ready to re-install without the pain of putting it all back together. These connections are water tight and are made for aircrafts so the do not fail!
Categories
Search
Displaying All products
Displaying products in category
Displaying search results for

1. Discon-X

New OEM wiring harness with start and ground cables with Discon-X modification.

$299.95

1. New Recorder Style IRC Mount

New Recorder Style mount for the HONDA 450X. Mount your IRC Recorder low, safe and away quickly and easily with this new tracker mount.

$59.95

1. Team CPR FAB Baja 1000 T Shirt

Officail 2009 Team CPR FAB Baja 1000 T Shirt.

$15.00

2. Discon-X (Your Harness)

Send in your factory harness for modification and save. Fast turnaround.
(See bottom of Discon-X page for shipping instructions)

$219.95

2. New Recorder Style WITHOUT HARDWARE

Choose this option if you already have an original CPR FAB Tracker Bracket and billet adapter. The new Recorder Style bracket is designed to use the same mounting hardware as the original brackets for the E-Trak to save on costs.

$39.95

3. Discon-X Add On 2-16

Power your lights by adding 2 heavy duty 16 gauge mil spec wires to your Discon-X harness. 1 Red and 1 Yellow.

$12.95

3. IRC Tracker Bracket

IRC E-Trak mounting bracket for Honda 450X all years.
Please choose Standard or Oil Cooler version.

$79.95

4. Discon-X Add On 3-18

Power your accessories by adding 3 - 18 gauge mil spec wires to your Discon-X harness for auxillary powers OR grounds. 1 Blue 1 green and 1 white. ( Not compatable with IRC Power Cable add on option )

$19.95

4. IRC Antenna Mount

IRC antenna mounting plate with 3M VH Bond and hardware.

( This item is for the "E-Trak" unit only. If you are running a new "Recorder" style unit in SCORE you do not need this )

$19.95

5. Discon-X Add On IRC Power Cable

Power your IRC E-Trak unit for SCORE racing through your Discon-X harness.
Comes completly wired with Weatherpak brand waterproof fuse holder and 3 amp fuse. ( Not compatible with 3 - 18 wire add on )

$29.95

SDR Oil Cooler

SDR Oil cooler / heat exchanger. Drop your oil temps up to a whopping 40 degrees and protect your investment from an expensive meltdown!
Includes modified radiator, billet oil pump attachment, ultralight oil lines and fittings, all hardware and seals.

$959.00